Omega nc800 vs Omega nc900: Which Juice Extractor is Better?

Omega nc800 vs Omega nc900

We live in a world where the faster the better. Not in the case of juice extractors. Some of the best tasting and healthiest juices coms from slow masticating juice extractors. Juice extractors can turn fruits and vegetables into juices to drink or to add to other recipes. They are specially designed to reduce waste from the food while keeping all of the nutrients. The food you want to juice is pushed down a chute through blades and through an auger system. The juice is separated from the pulp and you are left with a delicious homemade juice. We are going to look at two Omega juice extractors, Omega nc800 vs Omega nc900. We will look at all of their specific features and check out how the two differ. To help you decide which one is right for you, we will also look at the pros and cons of each before we deliver the final verdict.

 

Omega nc800 vs Omega nc900

We have put all of the specific information into a table so that you can see how they compare:

Omega nc800

Omega nc800

  • Size: 14.5”x15.5”x6.5”
  • Weight: 13lbs
  • Wattage: 150W
  • RPN: 80
  • Settings: 5
  • Accessories: 6 nozzles, dual-system auger, pulp container, juice jug, end cap, cleaning brush
  • Nutrition Centre: Fruit, vegetables, nuts, frozen desserts, soy milk, coffee and spice grinder, garlic and herb mincer
  • Color: Silver
  • Warranty: 15-year parts and performance
Omega nc900

Omega nc900

  • Size: 14.5”x15.5”x6.5”
  • Weight: 17.45lbs
  • Wattage: 150W
  • RPN: 80
  • Settings: 5
  • Accessories: 6 nozzles, dual-system auger, pulp container, juice jug, end cap, cleaning brush
  • Nutrition Centre: Fruit, vegetables, nuts, frozen desserts, soy milk, coffee and spice grinder, garlic and herb mincer
  • Color: Chrome
  • Warranty: 15-year parts and performance

Both juice extractors look exactly the same. They are 14.5” x 15.5” x 6.5”. The motor is kept inside an arched base with a built-in handle. There is a single chute that leads to a two-way system. One is an opening for the juice and a second opening to extract the pulp.Let’s start with how the two are similar.

The nc800 and nc900 can be dismounted down to the base. Both juicers come with 6 nozzles, the two parts that make up the dual-stage extraction, a pulp collection container, a juice jug, a cap, and a cleaning brush.

In terms of power, again, they are the same. Both of these Omega juices have 150w power. This might seem low to you but it is equal to 2horse power, so neither will have a problem cutting through harder vegetables.

Omega nc800 review

Again, if you have done any previous research you will have found juice extractors with an RPN from 12,000 to 15,000. This is not only unnecessary but it also has a negative effect on the juice. The faster the blades spin the warmer the parts become. This heat is transferred to the juice, often killing many of the nutrients. If you juice comes out slightly warm, you won’t be able to drink it straight away. The Omega juices have an RPN of 80. Also, the lower the RPN, the quieter the machine.

The dual-stage masticating system in both the nc800 and the nc900 extracts more juice than other machines. Fruit and vegetables are masticated before being pushed through a tight chamber. Here they are ground and pressed to extract the highest possible amount of juice.

The Omega nc800 and the Omega nc900 are known as nutrition centers. They are capable of a lot more than just juicing fruit and vegetables. They can grind coffee beans and spices, make baby purees and frozen desserts, prepare butternut, and mince garlic and herbs. If you are feeling adventurous you can try extruding pasta or even make your own soy milk. All of this is done while keeping the maximum amounts of vitamins, nutrients, and flavors.

Omega nc800 comparison

Both juice extractors have a handy end cap that can be adjusted. It has 5 settings that allow you to control the juice output and extraction.

Finally, both machines are easy to clean, especially thanks to the brush that comes with the machines. The juice pulp is automatically ejected to make life easier and cleaner too.

Omega nc800 vs Omega nc900: Weight

The weight of a juice will mainly depend on the material it is made of and the size of the motor. Average juice extractors are from 10lbs to 16lbs.

Omega nc800

It weighs 13lbs. It is not the lightest on the market but it is light enough to store without being a problem.

Omega nc900

Considering it is the same size as the nc800, we are baffled by its extra weight. This model weighs 17.45lbs

The winner is: The nc800

Read next:

Omega nc800 vs Omega nc900: Pros and Cons

Now for the pros and cons of the nc800 and the nc900.

Omega nc800

Pros:

  • When the pulp is extracted it is really dry, so you know all the juice has been extracted
  • There is very little foam produced
  • It’s easy to set up, clean and dismount

Cons:

  • Doesn’t always work well-extracting juice from berries

Omega nc900

Pros:

  • The juice extracted from leafy greens seems denser and tastes full of goodness
  • There is no metallic after taste
  • The machine is well built and solid

Cons:

  • Some of the plastic accessories are poorly designed

The Final Verdict

The nc800 and the nc900 are not just similar in many ways, but they are the same. They are the same size and they have the same design. Both come with the same set of accessories, right down to matching cleaning brushes.

Regarding their function, there is no difference in how they work or in the types of food they are able to work with.

The difference comes down to the color, which is for the individual to decide and the weight. The nc900 is the heavier model. Fortunately for the lighter nc800, it is also a fraction cheaper, and so making it the overall winner.

 


 

 

Leave a Reply